Accessories
Accessories
Scroll below for more information on Bluefin’s available digital signage accessories.
Push Buttons
Metal buttons with white LEDs designed for PoP displays, kiosks, and interactive retail environments. Available with different connectors for each Bluefin display. Ask us about custom LED colors for special orders.
Note: BrightSign GPIO buttons come pre-installed on a 6 port terminal block, maximum 2 buttons per unit.
BrightSign GPIO Buttons
20-3000-1364, 1x 19mm, 36’’ cable
20-3000-1363, 2x 19mm, 36’’ cable
V Series Buttons
20-3000-1370, 19mm, 24’’ cable
20-3000-1158, 19mm, 24’’ cable
USB Button Board Buttons
20-3000-1419, 19mm, 24’’ cable
20-3000-1406, 16mm, 24’’ cable
Touchless Buttons
Matte black buttons designed for PoP displays, kiosks, and interactive retail environments. Default range of activation is 4’’, and can be adjusted between 1’’ and 7’ at production.
Note: BrightSign GPIO buttons come pre-installed on a 6 port terminal block, maximum 2 buttons per unit.
BrightSign GPIO Buttons
20-3000-1442, 1x 19mm, 24’’ cable
20-3000-1455, 2x 19mm, 24’’ cable
20-3000-1456, 3x 19mm, 24’’ cable
20-3000-1457, 4x 19mm, 24’’ cable
V Series Buttons
20-3000-1453, 19mm, 24’’ cable
20-3000-1454, board modification for V Series screens.*
Button Extension Board for BrightSign Built-In
Supports up to 10 push buttons and a motion sensor, converting button presses to keyboard input events for BrightAuthor. Connects with USB-A, optionally control lighting with GPIO
USB Button Extension Board
20-3000-1382
USB Button Board Buttons
20-3000-1419, 19mm, 24’’ cable
20-3000-1406, 16mm, 24’’ cable
Cables and Extensions
Cables and extensions for power and communication.
USB Extension cable comes with mounting points at the female connection.
3-Port USB Hub requires no additional power, measures 2’’ x 0.7’’ x 1’’
Molex to Molex/Barrel Splitter may be used to power a screen and a 12V peripheral, such as a 75mm cooling fan.
USB to RS232 Serial Cable
20-3000-1267
USB Extension Cable, 5’
20-0130-1284
3-port USB-A Hub
20-0150-0652
Molex Power Extension
20-0130-1376, Mini Molex
20-0130-1498, Micro Molex
Molex to Molex/Barrel Splitter
20-0130-1387, Mini Molex
20-0130-1509, Micro Molex
Mini HDMI Cables for Daisy Chain
20-0150-0565, HDMI to Mini-HDMI
20-0150-0663, Mini-HDMI to Mini-HDMI
Replacement Power Adapters
Replacement power adapters for lost or damaged units. All screens come with power adapters, including PoE screens. 12V power adapters sold after 2019 use Molex Micro-Fit Jr. connectors. 24V power adapters use Mini-Fit Jr. connectors. Most Daisy Chain screens use USB Type C connectors.
Wallwart adapters have a 5 foot cable. Brick adapters have two 5 foot cables extending from each end (10’ total)
USA Power Adapters
20-0150-0603, 12V 2A Wallwart
20-0150-0641, 12V 3A Wallwart
20-0150-0642, 12V 4A Brick
20-0150-0466, 24V 4A Brick
International Power Adapters
20-3000-1453, 19mm, 24’’ cable
20-3000-1454, board modification for V Series screens.*
Micro-SD Cards
Sandisk Industrial Class 10 micro-SD cards, recommended for digital signage applications. These cards are protected against read-errors, which can accumulate as the screen runs for long periods without new content being written.
Class 10 Micro-SD Cards
20-3003-0015, 8gb
20-3003-0016, 16gb
Speakers
Speakers designed for fixtures and kiosks, which connect directly to Bluefin screens with 2-pin connections.
Speakers are 2.5’’ wide and have a 14’’ cable, with mounting holes for integration.
Available in 4ohm and 8ohm.
Speakers
20-0150-0378, 4Ω 3W
20-0150-0338, 8Ω 2W
Wi-Fi Modules
Optional Wi-Fi for BrightSign and R Series screens. Both versions include 802.11 protocols: A, B, G, N, AC.
Available on sample and production orders. Not available to install after purchase.
Wi-Fi Modules
BSBI-WIFI, for BrightSign
20-3000-1486, for R Series
75mm Cooling Fan
A 75mm fan powered from a 12V barrel connector, compatible with molex to molex/barrel splitter. Not required on most installations, but may improve air cooling in tight spaces.
75mm Cooling Fan
20-3000-1391